1.4980化學成分 - EN 10302: 2008

C	Cr	Ni	Mo	Ti	V	B	Mn	Fe	Al	Si	P	S
≤0.08	13.50-16.00	24.00-27.00	1.00-1.50	1.75-2.30	0.10-0.50	0.001-0.010	1.00-2.00	≤Bal	≤0.40	≤1.00	≤0.030	≤0.020

---

1.4980標準規(guī)范

• EN 10302: 2008 - Creep resisting steels, nickel and cobalt alloys
• EN 10269: 1999 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
• EN 10088-1: 2005 - Stainless steels. List of stainless steels

---

1.4980機械性能

Note: a cold pull rods, round cakes and ring blank standard (Ti) 1.80% ~ 2.35%.
2 (B) of hot-rolled and cold-rolled sheet standard 0.003% ~ 0.010%, 2.00% or less (Mn), (P) acuities were 0.020%, 0.015% or less (S).
3 (Al) of cold drawn wire standard acuities were 0.35%, 1.75% ~ 2.35% (Ti) and (Si) 0.40% ~ 1.00%, 0.020% or less (P), (S) of 0.015% or less.
Use the wire, cold heading standards (Ti) 1.75% ~ 2.35%, 0.40% ~ 1.00% (Si), (P) acuities were 0.025%, 0.020% or less (S).
5 hot rolled and forged bar standard (Cu) of 0.25% or less.
1.5), heat treatment system is the standard heat treatment system are shown in table 1-3;Alloy is 900 ℃ heat treatment system plus or minus 10 ℃, 1 to 2 h, oil cooled to + 750 ℃ + 10 ℃, 16 h, air cooling.

---

1.4980庫存信息

鋼號	規(guī)格mm	重量kg
660B	Ф90	1200
660B	Ф95	1030
660B	Ф100	1001
660B	Ф110	2211
660B	Ф130	3565
660B	Ф140	1211
660B	Φ90	260
660B	Φ100	986
660B	Ф44	698
660B	Ф45	1588
660B	Ф49	1685
660B	Ф50	368
660B	Ф60	2638
660B	Ф80	1232
660B	Ф85	1338
660B	Ф25
660B	Ф28	-
660B	Ф35	-
660B	Ф40	1132
660B	Ф70	986
660B	Ф75	1100
660B	Ф80	850

---

1.4980產品形態(tài)

• 熱軋和冷拉棒材, 圓棒, 扁鋼, 六角棒, 八角棒, 空心棒
• 帶鋼和鋼卷, 熱軋帶鋼, 熱軋鋼卷, 冷軋鋼帶, 冷軋鋼卷
• 冷軋板材, 熱軋板, 冷軋薄板, 中厚板, 高強鋼板
• 熱軋和冷拉異型鋼, 凹凸字鋼, 滑軌, 滑塊
• 熱軋和冷拉鋼絲, 扁絲, 盤條, 直條
• 自由鍛和模鍛, 扁鋼, 模塊, 環(huán), 桶, 餅, 階梯軸及定制化
• 熱擠壓和冷軋無縫管, 異型管, 方管, 毛細管
• 電渣錠

---